Borescope Buying Checklist: What to Check Before You Choose

Naisikyou editorial team. Facts checked 3 November 2026.

A borescope is an inspection camera on a long, thin probe. You feed the probe through a small opening, such as a spark plug hole, a gap in a wall or the access port of an engine, and look at the inside on a screen. It is the industrial cousin of the medical endoscope, and the two share most of their optics.

Choosing one matters more than the price tag suggests. A probe that is too thick will not fit, one that is too short will not reach, and a fixed tip may point everywhere except at the part you need to see. The checklist below runs through the points to settle before buying, using the figures a professional maker publishes as a reference. If you are new to the tool, start with our page on what a borescope is.

Typical jobs

Write down the job before comparing models, because it settles most of the choices below:

  • Engines: looking at cylinder walls and valves through a spark plug or injector hole. Needs a slim probe and, ideally, a steerable tip.
  • Buildings: checking wall cavities, under floors or behind fitted furniture through a drilled hole. Short, semi-rigid probes are easiest.
  • Plumbing and ducts: finding blockages or damage in drains and ventilation ducts. Needs length and a water rating.
  • Machinery and hobby work: gearboxes, bicycle frames, model engines. Often needs the thinnest probe you can afford.

Probe diameter

The opening decides the probe, not the other way round. Measure the smallest gap the probe must pass through, including any bend on the way.

  • Evident, which makes the IPLEX industrial videoscopes, describes small diameters of 2 to 4 mm as suited to narrow spaces such as turbine blades, and medium diameters of 6 to 8 mm as more durable with better imaging for general industrial work, in its remote visual inspection FAQ.
  • Its thinnest video borescope has an outer diameter of 1.8 mm, and its general-purpose models come in 4 mm or 6 mm, according to the company’s video borescope overview (checked 3 November 2026).
  • Thinner probes usually trade away some image quality, light output and toughness. Pick the thickest probe that still fits.

Insertion length

Measure from where you will hold the scope to the furthest point you want to see, then add a margin for bends. Evident’s FAQ gives a working range of 1 meter to over 10 meters depending on the depth of the inspection, and its general-purpose models run from 2 m to 10 m. The longest scope in its range reaches 30 m. For a car engine or a wall cavity, a short probe is easier to control; long probes are for pipes, boilers and large machinery.

Rigid, flexible or semi-rigid

  • Rigid scopes give the sharpest view along a straight line, for example straight into a cylinder.
  • Flexible scopes follow curved paths, such as pipes with elbows.
  • Semi-rigid probes hold a shape you bend into them, which helps when you need to push the tip in a set direction.

Evident’s FAQ draws the same three-way split. Many home inspection cameras are semi-rigid, which is a fair compromise for walls and vehicles.

Articulation

Articulation means steering the tip from the handle. Without it, you see only what is straight ahead of the probe.

  • Two-way articulation bends the tip up and down; four-way adds left and right.
  • Evident’s FAQ says two-way or four-way articulation covers most general inspections, while joystick or motorized control helps in complex areas such as weld seams or compressor blades.
  • Its professional scopes can articulate across a full 360-degree range.
  • Low-cost inspection cameras often have no articulation. A side-view mirror tip is a partial substitute.

Lighting and image

Most of what you inspect is dark. Look for adjustable LEDs at the tip, because a fixed, bright light can wash out shiny metal surfaces. Evident’s FAQ names bright, adjustable lighting as a key feature for spotting defects. Check the resolution of the camera itself, not only of the screen, and whether the focus range suits the distance you will work at.

Water and dust rating

If the probe will go into a drain, a tank or a damp wall, check its IP rating. The IP code is defined in the international standard IEC 60529, “Degrees of protection provided by enclosures”. The first digit describes protection against solid objects and dust, the second against water. Note which part carries the rating: often it is only the probe, not the handle or the screen. A rating also describes the conditions of a test, not unlimited use, so read the maker’s own limits.

Recording and measurement

  • Recording: photo and video capture to a memory card or a phone app lets you show the result to a mechanic, plumber or insurer.
  • Measurement: Evident lists 3D measurement as an optional upgrade that gives a figure for how severe a defect is. It is useful for professional inspection, rarely needed at home.
  • Phone-based scopes: cheap and convenient, but check that the app is still maintained for your phone’s operating system.

Safe use

  • Switch off and isolate electrical equipment before inserting any probe near wiring.
  • Let engines and heating equipment cool unless the scope is rated for heat.
  • Do not force a probe past resistance. Damaged probes are the most expensive part to replace.
  • An inspection borescope is not a medical device. Never use one on a person or an animal; medical endoscopes are built and cleaned to very different standards, which we describe in our article on what an endoscope is.

The checklist in short

  1. Smallest opening measured; probe diameter fits it.
  2. Insertion length covers the furthest point plus bends.
  3. Rigid, flexible or semi-rigid chosen for the path.
  4. Articulation if the target is not straight ahead.
  5. Adjustable lighting and a camera resolution you have checked.
  6. IP rating suited to water or dust, and you know which parts it covers.
  7. Recording format that works with your devices.
  8. Safe-use rules for the equipment you inspect.

The optics behind all of this go back to fiber bundles first used in medicine; our history of fiberoptic technology tells that side of the story.

Sources